Waterproof your Planter Box in 4 simple Stages
All Products you need to Waterproof your Planter Box
Step-By-Step Instructions
1. Wash/water-blast the entire surface.
2. Use a wet n dry vacuum for remaining water.
3. Pre cut Geo-Textile to bridge the seams, wall floor joins, corners and holes.
4. Apply Waterproof Sealant with brush to seams, wall floor joins, corners and holes before embedding the pre cut Geo-Textile - ensure you brush the air from underneath the applied Geo-Textile and make sure there are no crinkles. Once the area is finalised, instantly spray on Rapid Cure Spray to set product. Refer to the full video below.
5. Once dry, apply a first coat of Waterproof Sealant with brush, roller or LRDIY spray machine to full surface of the Planter box surface area.
6. Following the Waterproof Sealant application, instantly spray on Rapid Cure Spray to set product incase of approaching rain or to speed the job up (ensure Rapid Cure Spray is dry before apply second coat with brush or roller). Watch the rapid cure video to see how this is done.
7. Apply a second coat of Waterproof Sealant to entire surface area - more coats can be applied.
8. Recommended thickness 1.5mm dry-film (2 ltrs./sq. metre).
9. IMPORTANT - Waterproof Sealant must be cured - 48-72 hours, prior to applying protection board (corflute) and back filling with dirt.